212 Schwinn® Recumbent Exercise Bike Parts List Full Size Hardware Chart Product Illustration Assembly Instructions
Assembly Stage #2 Attach Rear Stabilizer and Seat Rail to Seat Assembly Assembly hardware required: (4) M8 Allen Bolts 16mm (item #5
Assembly Stage #3 Attach Front Stabilizer Tube and Pedals to Main Unit Assembly Hardware Required: (2) Flat Head Screws (item #12) Step 8: Att
Assembly Stage #4 Attach Seat Rail to Main Unit Assembly Hardware Required: (3) Allen Bolts 16 mm long (item #5) (3) Flat Washers (item #
Assembly Stage #5 Attach Handlebar Assembly and Run Cabling Through Handlebar Post Assembly Hardware Required: NONE St
Assembly Stage #6 Attach Console Mast to Main Unit Assembly Hardware Required: (4) Allen Bolts 16 mm long (item #5)
(4) Computer Screws (item #3) Step 13: Before sliding the HANDLEBAR POST (#4) onto the MAIN UNIT (#13), attach both HR CABLES (#
Troubleshooting the Schwinn 212 Recumbent Exercise Bike TIP: Use assembly diagram(s) as reference when troubleshooting unit. PROBLEM: Compute
FITNESS SAFEGUARDS AND WARNINGS Before starting any exercise program, consult with your physician or health professional. He or she can help estab
• Replace Warning Label if damaged, illegible, or removed. • We recommend that a minimum distance of 1 meter (39 inches) surrounding the bike is kep
Parts List Check Quantity Description Reference # __ 1 Computer 1 __ 1 H
Hardware Chart Stage#10 Screws M8xP1.25x16mm Flat Washer? 8*? 16*2T Allen Bolt M8xP1.25x16mm Stage#8Stage#6 Screws M8xP1.25x16mm Flat Wa
212 Assembly Drawing with Reference Numbers
Replacement Parts List Reference # Description Part # __ 1 Computer 18143 __ 2
Instructions IMPORTANT!: To ensure ease of assembly please verify the size and quantity of all the required assembly hardware and parts with the encl
Step 3: Attach SEAT (#23) to SEAT FRAME (#26) with 4 ALLEN BOLTS 45mm (#25) and 4 WASHERS (#15). Tighten Bolts. Step 4: Attach SEAT BACK (#27) to S
Commentaires sur ces manuels