BD26
GO BACK sub mode
GO BACK function means going from current location to the first point of the selected data
track. User cannot use this function if GPS is OFF.
1. Select the GO BACK sub mode and Press S3 to start. Chronograph will start and 2
seconds later, the watch will display view 1 with the remaining distance to the
destination and the chronograph time.
2. Press S11 to change view to track map (View 2). Press S11 to change view to view 3
with Speed, HRM, and Exercise time. Continue pressing S11 to change views. The
views are the same with RUN mode views except for views 1 and 2.
3. Press S1 to take Lap. When Auto lap is ON, the watch will automatically take laps
based on the settings.
4. Press S5 to stop. Press S1 to re-start.
5. While the chronograph is stopped, press S5 to save the current Track.
6. While Chronograph is running, you can change views by pressing S11. The views are
the same with RUN mode views except view 1 and 2.
At the upper right side of the screen or lower left side, there is an indicator whether you are
in GO BACK, GOTO mode, or you have exceeded or going away from your destination.
If there is no GPS signal, or the Run mode is running, you cannot use the GO BACK or
GOTO function.
When the Chronograph mode is running in the background and the user wants to use the
GO BACK function, the watch will display below to remind the user to stop the Chronograph
first before going to GO BACK function.
When you arrived at your destination, the watch will display ‘ARRIVED DEST”.
GOTO sub mode
The same procedure GO BACK sub mode except you are going from your current location to
the last point of the Track data.
VIEW sub mode:
Press S5 to enter view mode then Press S1/S5 to change views.
EDIT Sub mode:
1. Press S3 to edit the name of the data file.
2. Press S1/S5 to change values of the highlighted digit.
3. Press S3 to set the next digit. Press S7 to exit setting mode.
DELETE sub mode:
1. Press S3 to enter delete sub mode. The watch will display the data list. In this view, the
oldest file is on the top of the list. At the bottom of the list is the DEL ALL option.
2. Press S1/S5 to select which file to delete.
3. Press S3 to confirm delete.
SET MODE
Press S7 from Waypoint mode to Set mode. 1.5 seconds later the watch will display the
setting options: USER/ AUTO LAP/ SET Time/ SYSTEM/ PROD. ID/ EXIT. Press S1/S5 to
scroll through these options. Press S3 to enter selected option to set. Press S7 to exit to
Time mode.
If there is no key operation after 1 minute in this mode, the watch will auto exit to Time mode.
(2 pages)
(18 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels